Compliant with HDBT 2.0, the PT-HDBT-1002 HDBaseT Extender set is perfect for applications where high-definition AV distribution and long-distance transmission using an Ethernet switch are needed. Thus it is perfect for PC based transmissions, monitoring, big screens and/or video walls, meeting rooms, for education, bank and security institutions, etc.

Features:
- Compatible with HDMI 2.0 and backwards compatible with all previous HDMI standards (e.g. HDMI 1.4), delivering high-resolution AV signals up to 4K / UltraHD / 2160p @60Hz
- Supports the HDBaseT 2.0 standard for transmission of 4K signals over up to 100m over a single Cat. 5e / 6 or higher cable
- EDID "Pass-Thru" function and full compliance with HDCP 2.2 / 1.4
- Front panel status LEDs for power, link & HDCP status
- USB & RS232 control as well as unidirectional PoE / PoC / PoH (Power over HDBaseT)

USB & RS232 control wiring:
USB:
- Connect PC to the USB OUT port of PT-HDBT-1002 Transmitter
- Connect Mouse/Keyboard to the USB IN port(s) of the PT-HDBT-1002 Receiver
RS232:
- Connect PC to the RS232 port at either the PT-HDBT-1002 Transmitter or Receiver
- Connect the third-party device (such as projector) to be controlled with the RS232 port at the other end
- Send RS232 commands to control the third-party device. For more details about RS232 commands, please refer to the user manual for the third-party device

LED indicators:
1. "Power" LED:
OFF: No power
RED: DC power connected
2. "On" LED:
OFF: Not operational
Blinking GREEN: Normal operation
3. "Link" HDBT Link status indicatior LED:
OFF: No Link
GREEN: Link successful
Blinking GREEN: Link problem
4. "HDCP" indicator LED
OFF: No HDMI traffic (no picture)
GREEN: HDMI signal with HDCP
Blinking GREEN: HDMI signal without HDCP