3x2 2K Multiformat HDBaseT Presentation Switcher with Scaler

Luxi - Switcher - HDMI, DP & VGA

3x2 2K Multiformat HDBaseT Presentation Switcher with Scaler

  • Artikel-Nr. LU-THB-350
  • EAN 4251364713679
  • Voor meer informatie kunt u log in.
  • Uw Prijs *

Alle prijzen Excl. BTW

3x2 Multiformat Presentation Switcher with HDBaseT
Worlds smallest high performance all-format, all-purpose, HDCP compliant signal converter, scaler, switcher, splitter as well as audio mixer, embedder and de-embedder including a high efficiency fanless design and rack and under-table mounting options.
The Luxi Electronics™ switch is suitable for all applications and offers full HDCP compatibility due to its highly efficient, fanless design and rack / under-table mounting options. The dual outputs to HDBaseT and mirrored HDMI output allows an easy and frustration-free distribution to multiple displays at the same time. Additional functions such as audio output and an integrated scaler make the device a safe choice for professional environments.
No HDBaseT receiver is included - Available under LU-RHB-350.
The PureTools Series - High Quality AV Products for Commercial Applications
The universal Presentation Switcher / Scaler system is a complete AV switching, processing and controlling all-format, all-purpose solution.
To use the HDBaseT video output in remote locations of up to 70m, this transmitter needs to be connected to a LU-RHB-350 HDBaseT receiver, sold seperately.
There is only one power supply needed to power both units the other one can be supplied using PoC / PoE.

Power options
This product draws power from an external 24V power supply sold separately. Do NOT plug the power supply connector into any other connectors this could cause permanent damages to the product and void the warranty.
Thre receiving module (LU-RHB-350) can then be powerd via PoE / PoC.

Captive screw plug termination
The captive screw plugs for power, audio, RS-232 and contact controls are supplied with the unit. Separate the wires about 2.5 cm long strip off the wire insulation precisely by 5mm from the end. Identify the positive and negative leads for power the original Luxi power supply has a white stripe on the positive wire. If not sure, use a multi meter to verify.

Mounting options
Luxi offers the under desk mount LU-UDM-100 or the mediahub™ table tanks, both sold separately the product also fits many other mounting hardware using the type 4-40, 3/16" (5 mm) long screws supplied with the mounting hardware to screw onto the product.

Control options
When auto switching is turned off, pressing the "Input Sel." button on the front panel will toggle through the 3 video inputs. Three sets of external contact closure push buttons and LEDs can select inputs discretely incl. LED indication when a button is pressed, the associated LED would blink once, then stay on. An RS232 host connected to this module or the connected RHB-350 can control all functions.

Auto input switching
By default, the auto switching is turned on. When the respective front panel button is pressed, the 3 LEDs next to it will blink 3 times. To turn off auto switching, press and hold the button for about 7 seconds until the LEDs blink twice or use an RS-232 command. When auto switching is turned off, use the push-button, contact closure buttons or RS232 to select the desired input. To engage auto switching again, press and hold the button for >7 seconds until the LEDs blink 3 times or use the respective RS232 command.

Audio output connector wiring
Do NOT connect the sleeve (audio cable shield) to the "-" pin of the audio output this could cause permanent damages to the product and void the warranty.

Video signal path
There are 3 video inputs and 2 video outputs available. The analog RGB video from the VGA input is transmitted to the scalers analog input. The DisplayPort input signal is fi?rst converted to HDMI and can then be switched with the HDMI input signal.
The selected signal goes to the digital input of the scaler. The scaler converts all video to LVDS, feeds that signal to a HDMI encoder and then distribtes it mirrored to 1x HDMI and 1x HDBaseT output.

Audio signal path
There are threee different audio inputs as well as outputs available. The digital audio signals from the HDMI and / or DisplayPort inputs are selected by the HDMI switcher and then transported to the scaler module. The scaler de-embeds the audio and outputs it to digital S/PDIF and analogue audio. The analogue output is then mixed with the analogue audio input signal and goes to the balanced / unbalanced analog audio outputs and also to an A/D converter. The HDMI encoder can select this mixed audio or the direct digital audio from HDMI /DisplayPort and directly embed it to the HDMI and HBaseT outputs.

RS232 controls
All functions can by controlled using RS232.
Refer to the RS232 Setup Guide as well as the Quick-Start-Guide in the "Downloads" section to find all the codes needed.

Display power controls
LU-THB-350 features a configurable display power control to enable fully automated system operations without any operator or 3rd party control devices. It will send a "display power off" command via the RS232 ports of both THB-350 and RHB-350 after the last input signal disappears and will send a "display power on" command as soon as the first input signal is detected and will automatically select that input. The switcher uses one RS232 port to connect to both external hosts (optional only required for setup) and display in parallel with the display in "listening" mode only.

General Features:
Supports input signals: VGA + 3,5mm Stereo Audio, HDMI and DisplayPort
This HDBaseT transmitter only works in combination with a fitting HDBaseT receiver such as LU-RHB-350 or MHUB-RHB-350 (both sold seperately)
Mirrored Output: HDMI and/or HDBaseT for the same picture on two displays
HDBaseT transmits A/V, RS-232 and PoC to an HBaseT receiver (not included) over up to 70 meters
Integrated scaling function for perfectly fitting signal formats and resolutions
"Show Me" control button for fast and easy presentation
Individual, external "Show Me" connectors
3,5mm stereo audio output for a separate audio extraction
RS232 connector for external control featuring unique RS-232 controlled picture zoom (out) adjustments and selectable video resolutions of common 16:9, 16:10, 4:3 or pixel to pixel modes
Confi?gurable display power controls via RS232 enables fully auto operation systems without any 3rd party controller
Slim construction for a space saving installation
Auto Switch function including active signal input detection
Universal interface, compatible with all source signal formats
Worlds smallest high performance all purpose signal converter, scaler, switcher, splitter, mixer, HDCP compliant
VGA, HDMI, DP input, auto switch or front panel, RS232, contact controllable with discrete input LED indications
Independent analog audio input - Can be coupled with any video input, mixed with audio, de-embedded from HDMI or DisplayPort outputs to bal/unbal analog output, or embedded to HDMI
Dual mirrored A/V outputs: HDBaseT for big screens / projectors and HDMI for local monitors,
With or without OSD or screensaver and function to enable monitor sleep/wake up (energy saving)
HDBaseT output sending signals in up to 70m incl. PoC
High effi?ciency fanless design for ultimate reliability
Rack mountable, under-table mountable, above-projector mountable metal enclosures
Distribution of 1 HDMI, DisplayPort, VGA and audio signal to 1 audio, HDMI and HDBaseT output
Supports HDMI resolutions up to 4K UltraHD 30Hz
Automatic signal detection with display turn on and off function, integrated scaler
Balanced and unbalanced audio de-embedding, analog audio integration
Multiple video output formats or pixel-by-pixel, rack mountable, fanless
Logistics Information
Product 1. Net Weight in Kg 0,20
Product 1. Gross Weight in Kg 0,20
Product 1. Length in cm 10,9
Product 1. Width in cm 2,5
Product 1. Height in cm 7,6
Packaging 1. Length in cm 11
Packaging 1. Width in cm 13
Packaging 1. Height in cm 0,00
Master Carton Length in cm 51,4
Master Carton Width in cm 38,4
Master Carton Height in cm 30,7
Product Information
Europeans Customs Tariff Nr. 85437090990
Country of Origin China
Packaging Material Plastic/Paper
VPE Informationen
Master Packaging Unit (pcs) 20
Secondary Packaging Unit (pcs) 1
Input connector(s) 1x HDMI, 1x DP, 1x VGA, 1x 3,5mm Audio, 1x Button Breakout (4-pin Phoenix), 1x RS232 (3-pin Phoenix)
Output connector(s) 1x HDMI, 1x HDBaseT (Cat), 1x Audio (5-pin Phoenix)
Power connector(s) 24V 1A
Control connector(s) RS232, Breakout Buttons
Electric signal
Maximum data rate 10.2 Gbps
Maximum pixel clock / bandwidth Input: WUXGA 1920x1200px, FullHD, 1080p, max. 4K@30Hz | Output: 1080p
Standards HDMI 2.0, DP 1.3, VGA 0.7 Vp-p RGBHV (75Ω)
Digital video formats VGA, DP and HDMI, 4:3/16:9/16:10/p2p
Digital audio formats In: +3/-10 dBV | Bal.: -4 dBV, unbal. -10 dBV 60Ω
Lenght Up to 70m via HDBaseT
Power supply 24V1A, PoC / PoE
Enclosure Steel
Dimensions 109 x 25 x 152 mm
Signal transmission
Transmission modes Digital audio and video signals via HDBaseT
Supported Colors Up to 36-bit, compliant with DeepColor, etc.
Supported audio standards Multich. via HDMI / DP, Stereo In + Out
Maximum resolution 225 MHz
Safety CE, cUL, UL
MTBF 30,000 hrs
further Certificates PSE
Colour black
1x LU-THB-350 3x2 Multiformat Presentation Switcher with HDBaseT